CYALKIT-E02 太阳能供电的BLE传感器Beacon参考设计套件 (RDK)
|类别||物联网 > 开发套件|
CYALKIT-E02 Solar-Powered BLE Sensor Beacon Reference Design Kit (RDK)
Jun 20, 2016
The CYALKIT-E02 Solar-Powered BLE Sensor Beacon Reference Design Kit (RDK) has been created to help you design tiny solar-powered IoT devices with BLE wireless connectivity. The RDK comes with a Solar BLE Sensor as well as a BLE-USB Bridge and Debug Board. The Solar BLE Sensor is based on Cypress’ Energy Harvesting Power Management IC (PMIC) S6AE103A and EZ-BLE™ PRoC™ Module (CYBLE-022001-00). The sensor is designed to harvest energy from the sun or indoor lights and operate without a battery. The BLE-USB Bridge and Debug Board can be connected to a host (PC) that receives sensor data transmitted by the Solar BLE Sensor. The BLE-USB Bridge and Debug Board also help with on-chip debugging for the Solar BLE Sensor via an easy-to-use USB interface. This tiny RDK is a fully loaded connectivity solution that is compact, battery-free, and BLE-ready.
Tiny Solar BLE Sensor
The Solar BLE Sensor transmits temperature and humidity data using the BLE broadcasting mode. The Solar BLE Sensor is ultra-low power and works with just solar energy. The solar energy is managed by our versatile Energy Harvesting PMIC S6AE103A.
Top view Bottom view
BLE-USB Bridge and Debug Board
The BLE-USB Bridge and Debug Board are easy-to-use BLE data receivers for PCs and on-chip debugging for the Solar BLE Sensor.
The Cypress BLE-Beacon app works across iOS, Android, and PCs. The app is designed to receive and visualize beacon signals or sensor data that is transmitted by the Solar BLE Sensor. The app shows you real-time data as 2D/3D graphs. The logging data can be exported to CSV file for offline access.
Cypress® BLE-Beacon™ for iOS
Cypress® BLE-Beacon™ for Android
Cypress® BLE-Beacon™ for PC
·Solar BLE Sensor
Tiny, thin design: 25 mm diameter x 5.5 mm (Enclosure size)
Operates at minimum 100 lux
Transmits temperature and humidity sensor data
Up to 30-hours operation without ambient light via the fully charged super capacitor (0.2 F)
Mounted Energy Harvesting PMIC S6AE103A and EZ-BLE™ PRoC Module,
temperature and humidity sensor, 15 mm x 15 mm solar cell
·BLE-USB Bridge and Debug Board
Easy-to-use BLE data receiver and on-chip debugging for the Solar BLE sensor
LEDs for users, status, and USB power
·Cypress® BLE-Beacon™ app
Free software application
Supported iOS, Android devices, and PCs
2D/3D graph visualization for sensor data
·Solar-Powered BLE Sensor Beacon, which uses the following Cypress devices:
S6AE103A ultra low power Energy Harvesting PMIC
CYBLE-022001-00 EZ-BLE PRoC Module
·BLE-USB Bridge and Debug Board, which uses the following Cypress devices:
CY8C58LP PSoC 5LP for KitProg
CYBL10162 PRoC BLE
·Enclosure for Solar-Powered BLE Sensor
·Quick Start Guide
We also provide expansion kit CYALKIT-E03 if you need additional Solar BLE sensors.